Item added to your Save Search
Used
Move canvas 5BA-LA800S ABS actuator pump 44050-B2M10 [ZNo:07006716] 171682
1 /
0
1 /
0
NOTE
- Import duties, taxes and handling fees are not included in the price and must be paid by customers.
- Some air shipping carriers may charge an additional fee.
- The picture shown above may differ from the actual product. For the actual specifications, please contact us.
Used
Move canvas 5BA-LA800S ABS actuator pump 44050-B2M10 [ZNo:07006716] 171682
Original Price
$118
Price $101
You Save $17 (14%)
Earn 3 points ($3) on your FIRST PURCHASE
32people are looking at this item right now
| Item Location | JAPAN |
|---|---|
| Ref No. | PA115341284 |
| Payment MethodsPayment |
|
Items $101
Shipping $105
Total Price $206
to USA via Air Freight (change)
Shipping fee varies depending on items in your cart. You can change options later in the cart.
Specifications
| Condition | Used |
|---|---|
| Make | DAIHATSU |
| Model | - |
| Product Name | Move canvas 5BA-LA800S ABS actuator pump 44050-B2M10 [ZNo:07006716] 171682 |
| Model Code | - |
| Reg. Year/month | - |
| Mileage | - |
| Mission Type | - |
| Engine Model | - |
| Engine Size | - |
| Fuel | - |
| Drive | - |
| Auto Parts Maker | - |
| Genuine Parts No. | - |
Description
※Please confirm "instructions about the product " before having you bid※ ! As I cannot confirm all notification in the product page by application, the mobile indication I'm sorry to trouble you, but I have you open by a browser, and I would like confirmation by PC indication. Our product cannot input the in successful bidder now. In the case of PayPay balance payment, the payment with the debit card at the time of a procedure I am settled only for the product price once. I switch to an amount of money including the sequentially as soon as I can confirm the procedure and update it The balance of the product charges + is necessary at the time of update. I would like the preparation for balance that is higher than product charges X2+ beforehand. As it becomes the lack with the balance for the , please be careful. I change a payment amount of money of it, and for product price is refunded at the time of update automatically. It is an e-mail address of the from us I contact you to an e-mail address of the registration of successful bidder. Please confirm an e-mail address of the registration (during use), the reception setting beforehand. The product with more than 25 kg in weight of size after the packing 160cm or more Because the with the -like address is impossible, I fasten the Seino Transportation-like office, and it is the to a possibility shop. I am necessary for depending on a product for 2-7 days. Because company cannot deliver a product to transportation company Please let me know a company name, the name by all means. The by the bundling is different in the storage warehouse of the product, and there is the case that cannot support for prevention of damage. I cannot cope with questions such as the conformity confirmation after the I would like an inquiry than [I ask an exhibitor a question] beforehand. The partial (only as for ... only as for ...) sale, of the product cannot support for prevention of trouble. The product exhibits it after the operation check. (except the non-test, junk product) When there was not the problem until I remove it, but it is incompatible, and conformity is unconfirmed I do not accept the such as returned goods, the refund. [about confirmation of the conformity] I confirm the reference character from vehicle information. As I cannot answer immediately, I do not cope with the inquiry over the telephone. I am listed in the registration document than [I ask an exhibitor a question] I'm sorry to trouble you Please let me know number of cars , model-designated , the classification division . There are some domestic cars, case that you cannot confirm of the imported car, but please understand it. I cannot guarantee the conformity for ignorance in the change in the parts simple substance, an exchange career. As it becomes the reference degree, I am sorry to trouble you, but please understand it. The customer wanting a qualified bill prepares if you can request it. |
| Hokkaido | Hokkaido (Northern Hokkaido) | 3,300 yen | Hokkaido (Central Hokkaido) | 3,300 yen | Hokkaido (Eastern Hokkaido) | 3,300 yen | Hokkaido (Southern Hokkaido) | 3,300 yen | ||||||||
| Aomori | 1,900 yen | 1,900 yen | Miyagi | 1,900 yen | Akita | 1,900 yen | Yamagata | 1,900 yen | Fukushima | 1,900 yen | ||||||
| Kanto | Tokyo | 1,700 yen | Kanagawa | 1,700 yen | Saitama | 1,700 yen | Chiba | 1,700 yen | Ibaraki | 1,700 yen | Tochigi | 1,700 yen | Gunma | 1,700 yen | Yamanashi | 1,700 yen |
| Shinetsu | Niigata | 1,700 yen | Nagano | 1,700 yen | ||||||||||||
| Hokuriku | Toyama | 1,700 yen | Ishikawa | 1,700 yen | Fukui | 1,700 yen | ||||||||||
| Tokai | Aichi | 1,700 yen | 1,700 yen | Shizuoka | 1,700 yen | Mie | 1,700 yen | |||||||||
| Osaka | 1,700 yen | 1,700 yen | Kyoto | 1,700 yen | Shiga | 1,700 yen | Nara | 1,700 yen | Wakayama | 1,700 yen | ||||||
| China | Tottori | 1,700 yen | Shimane | 1,700 yen | Okayama | 1,700 yen | Hiroshima | 1,700 yen | Yamaguchi | 1,700 yen | ||||||
| Shikoku | Tokushima | 1,700 yen | Kagawa | 1,700 yen | Ehime | 1,700 yen | Kochi | 1,700 yen | ||||||||
| Kyushu | Fukuoka | 1,900 yen | Saga | 1,900 yen | Nagasaki | 1,900 yen | Kumamoto | 1,900 yen | Oita | 1,900 yen | Miyazaki | 1,900 yen | Kagoshima | 1,900 yen | ||
| Okinawa | Okinawa | ※ | ※ Please refer for the Okinawa, remote island. | |||||||||||||
| [the details of the product] : 07006716 | |
| Part name | Move canvas 5BA-LA800S ABS actuator pump 44050-B2M10 |
| Maker | Daihatsu |
| Car name | Move canvas |
| Model | 5BA-LA800S |
| Model - classification | 18746-6 |
| Type | 5DHB |
| Age type | October, 2018 |
| Part name | ABS actuator pump |
| Full model | LA800SGBVF |
| Number of cars | LA800S-0139975 |
| Genuine | 44050-B2M10 |
| Grade | G standard specifications |
| September, 2017 ... for the Late Model | |
| Shape of the product | [grade] : G standard specifications [Engine model] : KFVE [maker] : BOSCH [drive form] : 2WD [the mileage] : 67,854km [other information] : 89540-B2C80 |
| The parts except the exterior do not have the wound information basically Among them "the shape of the product"->I may specify it in "other information". As there is the notation which does not obey "a viewpoint of the wound information", please refer when it is unknown. |
| ・The viewpoint of the wound information of this product, please confirm following figure/indication example/explanation. |
※ The information of the wound is written from Left by a bad turn of the degree. ※ In the position of the wound, please see the following "positional information of the wound". ※ As for the viewpoint of a kind, a point, the volume of wound, a separate table look at "a kind, a point, the volume of wound". |
| Diagrammatical view | Explanation |
| [common position image] |
| Sign | Kind of the wound | Definition |
| A | Dent | The wound that sheet metal (including the pate case) repair needs basically (including the small dent such as the dimple) |
| AA | Convex | Wound of the umbonation pushed up by the backs such as panel products |
| AH | Sharpen; a wound | It is the state with the wound to the groundwork as well as paintwork (the wound that I rubbed a bumper with bricks, and there was) |
| AC | Rust dent wound | The state that I wear it, and the painting detachment part of the important point is rusted of the dent (the wound that the painting of the dent point comes off, and gets rusty) |
| AG | Color bare patch dent wound | The state that I wear it, and the painting of the important point comes off of the dent (mischievous wounds with a wound, the key that the painting of the dent point comes off) |
| AM | I compromise and turn | The wound that is in condition that a part of an edge and the CAD is broken with a panel product and bends |
| B | Scratch A | It is just available even if I do not paint it for the wound on the thin line again (wound going out by a compound, buff finish) |
| H | Scratch B | The wound that the painting is necessary for a scratch on the paintwork (state on the skin of the panel without the damage) |
| C | Rust | The wound that the painting comes off, and gets rusty |
| D | Off-and-on holidays | Wound to approximately 0.5mm included in glass and lenses by off-and-on holidays |
| MD | Off-and-on holidays (the inside) | Wound approximately 0.6mm - 1mm included in glass and lenses by off-and-on holidays |
| LD | Off-and-on holidays (very much) | Wound approximately 1.1mm - 2mm included in glass and lenses by off-and-on holidays (stepping stone wound to do crazing, and not to do) |
| DG | Bare patch off-and-on holidays | The wound that the painting comes off on a radiator grille or a panel by off-and-on holidays |
| E | Sheet metal repair trace | There is sheet metal repair before (sheet metal trace, judging from a multi-angle, to finally understand without knowing it at first glance) |
| EE | Sheet metal trace | There is sheet metal repair before |
| F | Sharpness | Wound (crack wounds such as installation parts) that I cut in a bumper or a fender |
| G | Tear off the painting | Wound (state without a dent, a wound, rust) that only paintwork comes off |
| J | Wiper wound | Scratch (thing to see with rays) with the wiper blade |
| JB | Light wiper wound | Scratch (wound outstanding a little) with the wiper blade |
| JH | Deep wiper wound | Scratch with the wiper arm |
| SS | Seal signboard | The state that sticks company names on doors with a seal or a sticker |
| PS | Coating signboard | The state that paints company names at doors |
| PY | I tan and fade | A lens surface fades with lights The state that the surface is discolored with a panel product, and fades |
| PG | Tear off clear | The thing which is in condition to be able to tear off lights, the clear coat in the panel product. But the thing which does not go for a thing, car inspection coming off over the entire surface is registration impossibility. |
| WV | Waviness | I wave, and the surface is in a condition with urethane bumpers |
| PK | The painting crack | Bumpers are the wounds that the paintwork cracked by a collision |
| PT | Touch pen | The state that I touched a panel or a bumper on the wound that there was and painted |
| Point | Definition |
| CAD | Corner |
| Line | In a press line |
| Mall | Mall |
| Edge | Relationship |
| The back | The backside |
| Size | Indication example |
| Circle | I display the diameter of the round range in cm |
| cm | Linear length |
| x | Range indication of wide cm X length cm |
| ke | The number |
[spl]
NOTE
- Import duties, taxes and handling fees are not included in the price and must be paid by customers.
- Some air shipping carriers may charge an additional fee.
- The picture shown above may differ from the actual product. For the actual specifications, please contact us.
