Used

I recommend Roadster for Good Condition NA8C, NB8C which has been washed (too dark in NA6, NB6) to 235-245cc of 12 hall injector NA8 for Demio for diversion super

1 / 0

NOTE

  • Import duties, taxes and handling fees are not included in the price and must be paid by customers.
  • Some air shipping carriers may charge an additional fee.
  • The picture shown above may differ from the actual product. For the actual specifications, please contact us.

Used

I recommend Roadster for Good Condition NA8C, NB8C which has been washed (too dark in NA6, NB6) to 235-245cc of 12 hall injector NA8 for Demio for diversion super

Price $385

BF Point Earn 3 points ($3) on your FIRST PURCHASE
12people are Looking this item right now
Item Location JAPAN
Ref No. PA28325114
Payment MethodsPayment BANK TRANSFER PayPal VISA Mastercard

Items $385

Shipping $60

Total Price $445

to USA via Air Freight (change)
Shipping fee varies depending on items in your cart. You can change options later in the cart.

Quantity : 1
Last One

Inquiry for this item

Specifications

Condition Used
Make MAZDA
Model -
Product Name I recommend Roadster for Good Condition NA8C, NB8C which has been washed (too dark in NA6, NB6) to 235-245cc of 12 hall injector NA8 for Demio for diversion super
Model Code -
Reg. Year/month -
Mileage -
Mission Type -
Engine Model -
Engine Size -
Fuel -
Drive -
Auto Parts Maker -
Genuine Parts No. -

Description

I am assigned to Roadster of NA8C, NB8C on charge pop.
A lot of misappropriated one does not seem to have any problem only by injector exchange in particular anymore as normal ECU.
It has been inspected from data of the quantity of jet.
(when the remodeled which air fuel ratio greatly turns into and Magine by the normal ECU control are not produced enough and are tuned up, I would finally like a judgment on the bidder side in the one which may not be stable.)

On the contrary, it is considerably too dark by NA6CE, the NB6C normal car.
Because soot increases when too dark, a trouble is more likely to come out in O2 Sensor and exhaust system in the future and cannot expect the fuel economy improvement as the dark share is wasted.
NA6, the NB6   is exhibiting it at "the which is for Demio for 12 hall injector four + conversion cord four set Roadster diversion for NA6CE, NB6C which has been washed, and is too dark" in toiu Item Name particularly.

The sense that there is always a difference of the feeling to step forward when I turned it off from air-conditioner ON when 12 holes express difference in power of becoming it…But, I come most nicely so far.

It is to put together that I controlled quantity of jet and usually improves it as much as a multi-hole thickens in a combustion state by becoming it on the fuel economy side.
Judging from quantity of jet, it is the calculation that less than 5% improve 10% in the case of NB8 in the case of NA8.
It is up to driving afterward. It becomes easy to earn fuel economy as much as power and torque rose if I drive without stepping on an accelerator more than usual.

As it is optional, and L880K Late Model Copen (a jet is too rich to a quantitatively normal car) can attach the connector parts of both male females with the car of the coupler type with the nail in the side that is common in recent Toyota system
As I can make conversion harness if I prepare a cord of the favorite length, I can easily attach it and it is easily pure anytime and can return it.
Please choose "quick POST + coupler parts" by a   method. In this case the   becomes only the quick POST. (the coupler is unnecessary for NA, NB Roadster)
In addition, I hope that it is not bid when jet quantity is correct on a side of successful bidder when I relate to it other than the normal car of NA8C, NB8C or cannot judge it.

It jetted it temporarily and, after the washing, tested it here, and oneself who could ship it from the mist states in peace repeated washing and a jet test until assent went.
With the injector which I do not wash particularly the parts of the dismantling car, I do not know the line of fire clearly and it is pure white and thinks that I am essential to washing and the jet test for 12 holes original minute fog dancing as there is not it.
A difference appears by a combustion state and feeling, and 12 holes which a hole is easy to rebuke small should be minded in particular.
I change the O ring for a fluorine-based O ring of four kinds of durable high D before  .

The packing is   by the packing of the form that I considered in a bag of the zipper   and pop   while occupying thickness 3cm in the quick POST.
I ship it by the setting of the days enough ahead of schedule than it surely in the days until   day, but the   is approximately impossible practically because it is busy not a main profession.
Quick POST is   in a timing that a reception desk day is the same in the packet that shipment is smooth because mailing shipment is possible and says or is late for on 1st.

I may raise it by the change of the cost price of the injector before the washing.
When washing is not enough, I may raise it temporarily. Thank you for your understanding beforehand.

I have vehicle (NA8C) with normal ECU equipped with this injector which I washed on take a test ride on pro-development test driver and several engineer-affiliated Mazda,
As I had the communication from the one of the successful bidder when I received a favorable reception with surprise including a fluent connection to 1000 - 3000rpm and the increase of the torque, I think whether an affinity is considerably good.

When I do not wash it, the middle relatively has little degradation, but quantity of jet decrease at the time of a low turn and the high turn becomes big.
As you do not need to make a bid for it at me as it leaves 12 holes particularly conspicuously, I strongly recommend washing and installation after I was able to wash it properly or confirm it.

There is the person washed DIY with dehydrated ethanol, but it is usable for the appearance washing of the thing used with a part of the ingredient of the parts cleaner, but the internal washing does not fall in a place ending soon even when hanging an ultrasonic cleaning and it is for the inside washing and feels inadequacy as the last clogging was not produced.
Please be careful that the information of the system that I did for trial of the information of the net such as Kalla not to look after is not misunderstood when it is an official method. I recommend what is inspected properly.

The YAMATO home delivery compact (YAMATO compact and notation) is setting for Hokkaido, Chugoku district, Shikoku district, Kyushu district, Okinawa where the days hang over.
(doing it in a system nationwide including BOX)
Because it is not a main profession, please understand it that on the day you are not in time for for receptionist basically.
As   may become slower than the quick POST which I can ship in post-YIN, in the case of Kanto, the case that QUICK POST is quicker in arrival may come out.

As there was a question before, I changed it to deliver it, and to choose it.

As this performance appears only after washing it properly, naturally performance falls into 3 times with the injector of non-washing of the car which ran from the double as I cannot guarantee performance at 40,000km in IRS either.
It is a matter of course, but cannot cope with the vehicle which the parts which air fuel ratio turns into like a high cam clearly were attached to only by having touched this injector.

NOTE

  • Import duties, taxes and handling fees are not included in the price and must be paid by customers.
  • Some air shipping carriers may charge an additional fee.
  • The picture shown above may differ from the actual product. For the actual specifications, please contact us.